SUMMARY: Requires precision welding of company and customer products in compliance with rigid customer and engineering specifications and requirements using the GTAW process. Characteristic of this classification is welding product parts and assemblies (normally in areas of easy access on flat
JSfirm

Welder - Burbank, CA

HSGI, Inc. • 
Burbank, California, USA
Position Type: Contractor
Job Description:

SUMMARY:

  • Requires precision welding of company and customer products in compliance with rigid customer and engineering specifications and requirements using the GTAW process.
  • Characteristic of this classification is welding product parts and assemblies (normally in areas of easy access on flat or horizontal surfaces) in accordance with customer specifications and requirements, using gas, inert gas arc.
  • At least one of the following alloy groups in accordance with AWS D17.1 and QOP-62-02, in Groups I, II, III, IV, and VI.

DUTIES & RESPONSIBILITIES:

  • Shall qualify to AWS D17.1 and QOP-62-02 which includes but is not limited to Groups I, II, III, IV, and VI.
  • Weld shall pass visual, radiographic, and metallographic examinations.
  • Must understand all weld symbols and weld specifications
  • Determines from the nature of assignments, blueprints, welding manuals, and established procedures, the sequence of welding operations, tolerances and dimensional requirements, and correct relationship of parts.
  • Performs difficult gas, inert gas arc, or metallic arc welding of any type of metals and their alloys on all surfaces (flat, horizontal, vertical, or circular) of product parts and assemblies in compliance with customer and engineering specifications and requirements where procedures are well established and incorrect weldments and parent metal failures can be readily detected and repaired.
  • Weld various types of metals and alloys used in the construction of products, parts, assemblies, and equipment involving difficult types of welding such as:
    • Thin materials (.010" or lighter to .100”)
    • Thin materials to castings.
    • Thick materials (.101” to .5”)
    • Close to edge (.050" or less) where edge may be readily burned off unless special care is taken.
    • Thick to thin combination.
  • Weld formed parts and assemblies where surface profile, finish, and contour are critical.
  • Weld tanks, pressure vessels, piping, and similar items where soundness and penetration of the weld a vital factors.
  • Weld parts and assemblies where application of heat to surfaces is a prime factor of distortion and warping which must be held to a minimum in order to maintain specified dimensions and tolerances after welding.
  • Layout locations of welds and make your own setups as required by written instructions.
 
CONTACT:  Kelly Milowe  (251) 260-6022  kelly@hsgi-inc.com
 

ABOUT US:

We care about you and your career, we care about you and the ones you care for, our success is your success, you are not just a contractor you’re a valued team member and part of our family we look forward to working with you soon!

HSGI, Inc. is a full service staffing company supplying qualified technical and professional employees to the most reputable companies in the Aerospace/Aircraft industry—across the United States and abroad.

Job Requirements:

REQUIREMENTS:

  • Performs x-ray quality precision welding of company and customer products in compliance with rigid customer and engineering specifications and requirements using the GTAW process. At least one (1) of the following certifications must be maintained in accordance with AWS D17.1 and QOP-62-02, in Groups I, II, III, IV, or VI.
    -OR-
  • Performs precision welding of company and customer products with two (2) or more certifications in accordance with AWS D17.1 and QOP-62-02, in Groups I, II, III, IV, or VI and actively welds those materials. Departmental job requirements may require more than two (2) certifications.
  • Associate degree (A.A.) or equivalent from a two-year College or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience. 

The operator must obtain and maintain:

  • SSP Welding Certificate
  • “S” Stamp
  • Maintain minimum output of 90%
  • Maintain minimum product quality acceptance of 95%
  • Valid Driver’s License Required
  • Must be willing to work any shift including unscheduled overtime, nonscheduled work days, and holidays as needed 
  • MUST be able to pass a 10-year federal background check in order to obtain an airport security badge.  

 

CONTACT:  Kelly Milowe  (251) 260-6022  kelly@hsgi-inc.com

 

MISCELLANEOUS:

  • MUST be able to pass a 10 year federal background check in order to obtain an airport security badge.
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

JSfirm, LLC

Roanoke, TX

jobs@jsfirm.com

JSfirm LLC, Privacy Policy

All rights reserved. 2001-2024 JSfirm