Quality Assurance Inspector, F-35 - Level 4
Lockheed Martin •
Position Type: Permanent
Job Description:
Description:This position is part of the team supporting F-35
aircraft modifications at Luke AFB, AZ. The position is responsible for performing inspection functions to ensure compliance with applicable aircraft workbook specifications, engineering drawings/technical data, and approve or reject work accomplished by team
members.
Requires experience in inspection of aircraft ground handling/servicing; component removal/replacement; scheduled and unscheduled maintenance; Time
Compliance Technical Directive (TCTD) execution.
Requires experience in inspection of Aerospace
Ground Equipment AGE/GSE; Hazardous Waste
Management programs; Tool and FOD industry
standards; equipment calibration compliance and
general security procedures.
Requires the ability to evaluate process compliance, write/review Corrective Action Preventative Action
(CAPA) reports, perform root cause analysis and
validate quality plans, processes and responses.
Requires ability to identify and understand non-
conformities as they relate to Safety-of-Flight
inspections, procedural breakdowns, and program
(process) audits.
Requires ability to conduct incident and/or mishap
investigation audits and prepare quality
documentation/reports by collecting, analyzing, and summarizing information, and trends including failed process, recalls, corrective actions, and validations.
Must be able to work any shift as required to support customer including weekends.
Must be able to travel to support customer needs.
Must have a valid driver’s license.
Must have an Interim Secret Clearance to be
considered for the position.
Must be a U.S. citizen. This position is located at a
facility that requires special access.
Basic Qualifications:
Candidate must have a minimum USAF 7-Level skill rating (or
equivalent experience) or USMC Level 4 MATMEP
rating.
Candidate must have 8-10 years of recent (within the past 5 years) military aircraft maintenance experience.
Experienced in inspection of aircraft and ground
handling/servicing support equipment; component removal/replacement; scheduled and unscheduled maintenance; Time Compliance Technical Directives (TCTD) execution.
Experience in inspection of Aerospace Ground
Equipment AGE/GSE; Hazardous Waste Management programs; Tool & FOD industry standards;
equipment calibration procedures; general security procedures.
Demonstrated ability to conduct incident and/or
mishap investigation audits and prepare quality
documentation/reports by collecting, analyzing, and summarizing information, and trends including failed process, recalls, corrective actions, and validations.
Desired Skills:
1-2 years 5th Generation (F-35, F-22) Fighter
Aircraft experience in Modification, Maintenance
and/or Quality Assurance roles.
Contractor Field Team (CFT) experience.
Working knowledge of Computerized Maintenance Management System (CMMS).
Working knowledge of Action Requests (AR).
Familiar with DCMA Instruction 8210.1C associated in aircraft ground operations and maintenance
procedures.
Familiar with Air Force Instruction (AFI) 21-101
and/or OPNAV 4790 Naval Aviation Maintenance
Program (NAMP) instructions.
Experience with USAF Maintenance Standard
Evaluation Program (MSEP) and associated data
base.
Familiar with International Standards Organization (ISO) 9001:2008 & AS9100C aviation standards.
Experience with Quality Management System
(QMS) internal audit processes.
Ability to identify and understand non-conformities as they relate to Safety-of-Flight inspections,
procedural breakdowns and/or program (process)
audits.
Experience with evaluating process compliance,
write/review Corrective Action Preventative Action (CAPA) reports, perform root cause analysis and
validate quality processes, responses and plans.
Possess effective communication skills for coordinating with Aircraft Managers/Supervisors,
Field Service Reps, System Engineers, Maintenance Logistics Support Managers, Customer
(DCMA/GCQA), COR/QAE and maintainers regarding quality issues, Instrumentation System Integration, Deficiency Analysis/Reporting, customer complaints, and other issues related to higher quality as they
occur.
Ability to read/interpret engineering
drawings/instructions; system schematics/blueprints; and technical policy/maintenance instructions.
Capable of conducting teleconference and/or
briefing (presentation) to management/customer.
Excellent organizational, administration, and
computer skills (Microsoft Office 365).
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.
As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level: Hourly/Non-Exempt
Business Unit: AERONAUTICS COMPANY
Relocation Available: Possible
Career Area: QA/Test and Inspection
Type: Full-Time
Shift: First
1-2 years 5th Generation (F-35, F-22) Fighter
Aircraft experience in Modification, Maintenance
and/or Quality Assurance roles.
Contractor Field Team (CFT) experience.
Working knowledge of Computerized Maintenance Management System (CMMS).
Working knowledge of Action Requests (AR).
Familiar with DCMA Instruction 8210.1C associated in aircraft ground operations and maintenance
procedures.
Familiar with Air Force Instruction (AFI) 21-101
and/or OPNAV 4790 Naval Aviation Maintenance
Program (NAMP) instructions.
Experience with USAF Maintenance Standard
Evaluation Program (MSEP) and associated data
base.
Familiar with International Standards Organization (ISO) 9001:2008 & AS9100C aviation standards.
Experience with Quality Management System
(QMS) internal audit processes.
Ability to identify and understand non-conformities as they relate to Safety-of-Flight inspections,
procedural breakdowns and/or program (process)
audits.
Experience with evaluating process compliance,
write/review Corrective Action Preventative Action (CAPA) reports, perform root cause analysis and
validate quality processes, responses and plans.
Possess effective communication skills for coordinating with Aircraft Managers/Supervisors,
Field Service Reps, System Engineers, Maintenance Logistics Support Managers, Customer
(DCMA/GCQA), COR/QAE and maintainers regarding quality issues, Instrumentation System Integration, Deficiency Analysis/Reporting, customer complaints, and other issues related to higher quality as they
occur.
Ability to read/interpret engineering
drawings/instructions; system schematics/blueprints; and technical policy/maintenance instructions.
Capable of conducting teleconference and/or
briefing (presentation) to management/customer.
Excellent organizational, administration, and
computer skills (Microsoft Office 365).
Job Ident #:
69053963024
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)